-
1 × SRD 1,600.00 -
1 × SRD 1,504.55 -
1 × SRD 327.27 -
1 × SRD 697.50 -
1 × SRD 2,622.73 -
1 × SRD 35,945.00 -
1 × SRD 3,025.00 -
1 × SRD 2,622.73 -
1 × SRD 1,995.45 -
2 × SRD 21.45 -
1 × SRD 3,995.45 -
1 × SRD 150.00 -
-
1 × SRD 7,318.18 -
-
1 × SRD 2,900.00 -
1 × SRD 722.73 -
1 × SRD 1,359.09 -
2 × SRD 340.91 -
1 × SRD 681.82 -
1 × SRD 977.27 -
1 × SRD 2,590.00 -
1 × SRD 540.91 -
1 × SRD 9,065.00 -
-
1 × SRD 780.00 -
1 × SRD 960.00 -
-
2 × SRD 7,850.00 -
1 × SRD 485.00 -
1 × SRD 5,650.00 -
1 × SRD 35.00 -
1 × SRD 2,904.55 -
1 × SRD 7,750.00
-
1 × SRD 1,347.50 -
1 × SRD 890.00 -
1 × SRD 120.00 -
1 × SRD 359.09
-
MAKITA EK7301 14″73CC POWER CUTTER
- Five-stage, foam-paper-nylon system with advance
directional air flow provides cleaner air for better saw
performance - Improved ignition system with larger flywheel and rare
earth magnets create more efficient power - Cutting arm position changes simply from center position
to flush (outboard) position allowing cuts directly
adjacent to curb edges, wall or directly above the ground - On-Off-Choke operation switch on a single lever for
operator convenience - Cushioned operator grips with 4 vibration-absorption
rubber buffers for increased operator comfort - Microchip-controlled carburetor designed to compensate
engine timing according to work load - Aluminum guard and wheel pressure plates to reduce weight
- Starter grip decompression valve for faster starting
SRD 33,560.00SRD 83,900.00MAKITA EK7301 14″73CC POWER CUTTER
SRD 33,560.00SRD 83,900.00 - Five-stage, foam-paper-nylon system with advance
-
MAKITA HM1810 BREAKER HAMMER
- Power : 15 AMP motor to tackle demanding jobs
- Comfort : Makita’s exclusive AVT® counterbalance system reduces vibration
- Durability : Automatic brush cut-out system for longer tool life
- Convenience : 16.4 ft. long power cord for easy maneuverability
- Includes : Hex wrench
SRD 35,550.68SRD 88,876.70MAKITA HM1810 BREAKER HAMMER
SRD 35,550.68SRD 88,876.70 -
MAKITA EK7651H 14″ POWER CUTTER 4ST ENGINE INSTALLED
- Automatic engine decompression valve is engineered
into the cam gear to reduce pull start force by 40% - Five-stage, foam-paper-nylon filtration system with
advance direction air flow to provide cleaner air for better
engine durability - Integrated wheels reduce fatigue during long straight cuts
and retract when not in use to prevent unexpected
movement - Clear primer bulb facilitates fuel delivery to the carburetor
for easier cold starts - Pressure compensated carburetor with vented choke
plate is engineered to reduce flooding by automatically
adjusting to deliver the proper amount of fuel - Advanced oil separation & lubrication system to improve
valve train durability and engine life - Specially treated rods, followers and valves minimize wear
and extend engine life - Single lever On-Off-Choke operation switch for operator
convenience - Shielded exhaust outlet and larger spark arrestor screen
prevents contaminates from restricting air flow - External fuel tank vent eliminates pressure build up
- Sealed cartridge recoil starter rope reduces wear by
keeping out dust and debris - Cutting arm easily changes from center position to flush
(outboard) position allowing cuts directly adjacent to curb
edges, wall or directly above the ground - Cushioned operator grips with 4 vibration-absorption
rubber buffers for increased operator comfort
SRD 38,200.00SRD 95,500.00MAKITA EK7651H 14″ POWER CUTTER 4ST ENGINE INSTALLED
SRD 38,200.00SRD 95,500.00 - Automatic engine decompression valve is engineered
