MAKITA EK7651H 14″ POWER CUTTER 4ST ENGINE INSTALLED
Roll over image to zoom in
SRD 38,200.00SRD 95,500.00 (-60%)
- Automatic engine decompression valve is engineered
into the cam gear to reduce pull start force by 40% - Five-stage, foam-paper-nylon filtration system with
advance direction air flow to provide cleaner air for better
engine durability - Integrated wheels reduce fatigue during long straight cuts
and retract when not in use to prevent unexpected
movement - Clear primer bulb facilitates fuel delivery to the carburetor
for easier cold starts - Pressure compensated carburetor with vented choke
plate is engineered to reduce flooding by automatically
adjusting to deliver the proper amount of fuel - Advanced oil separation & lubrication system to improve
valve train durability and engine life - Specially treated rods, followers and valves minimize wear
and extend engine life - Single lever On-Off-Choke operation switch for operator
convenience - Shielded exhaust outlet and larger spark arrestor screen
prevents contaminates from restricting air flow - External fuel tank vent eliminates pressure build up
- Sealed cartridge recoil starter rope reduces wear by
keeping out dust and debris - Cutting arm easily changes from center position to flush
(outboard) position allowing cuts directly adjacent to curb
edges, wall or directly above the ground - Cushioned operator grips with 4 vibration-absorption
rubber buffers for increased operator comfort
Product specifications
Engine displacement | 4.6 cu.in. (76 cc.) |
Maximum power | 4.1 HP / 3.0kW |
No load speed | 9,350 RPM |
Max spindle speed | 4,300 RPM |
Fuel | Unleaded gasoline |
Fuel tank capacity | 37 oz. |
Arbor | 20mm/1” Adapter |
Wheel diameter | 14″ |
Maximum cutting depth | 4-13/16″ |
Dry weight | 28.4 lbs |
Additional information
Brand |
---|