-
MAKITA KP0800-240 POWER PLANER
- Right Chip Ejection
- Parallel Fence
- Lock-Off Switch
- Dust Extraction Facility
- Fan-Cooled Motor
- Replaceable Carbon Brushes
- Soft-Grip Handle
SRD 4,840.00SRD 12,100.00MAKITA KP0800-240 POWER PLANER
SRD 4,840.00SRD 12,100.00 -
MAKITA EK7651H 14″ POWER CUTTER 4ST ENGINE INSTALLED
- Automatic engine decompression valve is engineered
into the cam gear to reduce pull start force by 40% - Five-stage, foam-paper-nylon filtration system with
advance direction air flow to provide cleaner air for better
engine durability - Integrated wheels reduce fatigue during long straight cuts
and retract when not in use to prevent unexpected
movement - Clear primer bulb facilitates fuel delivery to the carburetor
for easier cold starts - Pressure compensated carburetor with vented choke
plate is engineered to reduce flooding by automatically
adjusting to deliver the proper amount of fuel - Advanced oil separation & lubrication system to improve
valve train durability and engine life - Specially treated rods, followers and valves minimize wear
and extend engine life - Single lever On-Off-Choke operation switch for operator
convenience - Shielded exhaust outlet and larger spark arrestor screen
prevents contaminates from restricting air flow - External fuel tank vent eliminates pressure build up
- Sealed cartridge recoil starter rope reduces wear by
keeping out dust and debris - Cutting arm easily changes from center position to flush
(outboard) position allowing cuts directly adjacent to curb
edges, wall or directly above the ground - Cushioned operator grips with 4 vibration-absorption
rubber buffers for increased operator comfort
SRD 38,200.00SRD 95,500.00MAKITA EK7651H 14″ POWER CUTTER 4ST ENGINE INSTALLED
SRD 38,200.00SRD 95,500.00 - Automatic engine decompression valve is engineered
-
MAKITA EK7301 14″73CC POWER CUTTER
- Five-stage, foam-paper-nylon system with advance
directional air flow provides cleaner air for better saw
performance - Improved ignition system with larger flywheel and rare
earth magnets create more efficient power - Cutting arm position changes simply from center position
to flush (outboard) position allowing cuts directly
adjacent to curb edges, wall or directly above the ground - On-Off-Choke operation switch on a single lever for
operator convenience - Cushioned operator grips with 4 vibration-absorption
rubber buffers for increased operator comfort - Microchip-controlled carburetor designed to compensate
engine timing according to work load - Aluminum guard and wheel pressure plates to reduce weight
- Starter grip decompression valve for faster starting
SRD 33,560.00SRD 83,900.00MAKITA EK7301 14″73CC POWER CUTTER
SRD 33,560.00SRD 83,900.00 - Five-stage, foam-paper-nylon system with advance
-
SRD 18,059.80
SRD 45,149.50MAKITA TW1000 1″ IMPACT WRENCH W/FRICTION RING ANVIL
SRD 18,059.80SRD 45,149.50 -
Channellock 1/2 In. Drive 24 mm 6-Point Deep Metric Impact Socket
6-point sockets offer more surface area making them less likely to slip off or round over corners. Chrome molybdenum steel with black oxide finish. Lifetime warranty.
SRD 324.50SRD 590.00Channellock 1/2 In. Drive 24 mm 6-Point Deep Metric Impact Socket
SRD 324.50SRD 590.00 -
CHANNELLOCK 302965 UNIVERSAL SOCKET SET (20-PIECE) 3/8 INCH CHROME VANADIUM STEEL
Versatile socket set designed for both standard and metric fasteners. It includes a range of sockets from 1/4″ to 3/4″ (SAE) and 9 mm to 19 mm (Metric), along with a 3/8″ drive ratchet handle and a 6″ extension. Made from chrome vanadium steel and textured bands for improved grip.
SRD 2,197.25SRD 3,995.00CHANNELLOCK 302965 UNIVERSAL SOCKET SET (20-PIECE) 3/8 INCH CHROME VANADIUM STEEL
SRD 2,197.25SRD 3,995.00 -
Channellock 28-in-1 Universal Ratcheting Box Wrench Set (2-Piece)
This 2-Piece 28-in-1 universal ratcheting box end wrench set is made from chrome vanadium steel and designed for heavy duty applications. Each wrench fits more than 28 sizes. 63 total sizes including: 5/16 In., 3/8 In., 7/16 In., 1/2 In., 9/16 In., 5/8 In., 11/16 In., 3/4 In. 6-point and 12-point; 8mm, 10mm, 11mm, 13mm, 14mm, 16mm, 17mm, 19mm 6-Point, 12-Point and Spline; E10, E12, E14, E16, E18, E20, E22, E24 Star; 9/32 In., 11/32 In., 3/8 In., 7/16 In., 15/32 In., 17/32 In., 9/16 In., 5/8 In. Square; 7mm, 9mm, 11mm, 12mm, 13mm, 14mm, 16mm Square.
SRD 1,784.75SRD 3,245.00Channellock 28-in-1 Universal Ratcheting Box Wrench Set (2-Piece)
SRD 1,784.75SRD 3,245.00 -
Channellock Products 1/2″ Drive 72-Tooth Ratchet
- Quick release ratchet with 72 teeth, 5 deg (degree) swing for better performance in tight spaces.
- Textured band for greater gripping power.
- Chrome vanadium steel.
- Meets or exceeds ANSI (American National Standards Institute) specifications.
- Lifetime warranty.
SRD 1,446.50SRD 2,630.00Channellock Products 1/2″ Drive 72-Tooth Ratchet
SRD 1,446.50SRD 2,630.00 -
Channellock 3/8 In. Drive 72-Tooth Quick Release Ratchet
Product overviewThis Channellock quick release ratchet offers 72 teeth with a 5 deg (degree) swing for better performance in tight spaces. Not having a thick head makes it efficiently designed for practicality, making it easier to use in tight spaces. The ratchet features a textured band for greater gripping power. Constructed of chrome vanadium steel provides durability and strength. Meets or exceeds ANSI (American National Standards Institute) specifications. Lifetime warranty.SRD 1,179.75SRD 2,145.00Channellock 3/8 In. Drive 72-Tooth Quick Release Ratchet
SRD 1,179.75SRD 2,145.00 -
Channellock Metric 24 mm 12-Point Ratcheting Combination Wrench
Color band denotes SAE/Metric measurement for easy identification. Feature non-slip open end and extended length for improved leverage. Chrome vanadium steel. Fully polished for professional appearance. Lifetime warranty.
SRD 1,138.50SRD 2,070.00Channellock Metric 24 mm 12-Point Ratcheting Combination Wrench
SRD 1,138.50SRD 2,070.00 -
Channellock Metric 22 mm 12-Point Ratcheting Combination Wrench – Channellock
Combination Wrench features 2.5 degrees of arc swing and 144 ratcheting positions allowing quick and efficient work in tight spaces. This wrench has double-stacked pawls within the ratcheting mechanism which increases durability and extends the life of the tool. The MAXBITE Open-End Grip improves the wrench’s grip on nuts and bolts offering 25% more torque than smooth-faced wrenches. The combination wrench features an ergonomic I-Beam handle design for improved comfort and ink-filled size labels for easy size identification and quick distinction between SAE and metric sets.
SRD 1,006.50SRD 1,830.00Channellock Metric 22 mm 12-Point Ratcheting Combination Wrench – Channellock
SRD 1,006.50SRD 1,830.00 -
Channellock 10-Piece Combination Wrench Set
Red color band denotes SAE measurement for easy identification. Chrome vanadium steel. Fully polished for professional appearance. Mounted in convenient storage/carrying rack. Lifetime warranty. Includes 1 each: 1/4″, 3/8″, 7/16″, 1/2″, 9/16″, 5/8″, 11/16″, 3/4″, 13/16″, and 7/8″.
SRD 1,908.50SRD 3,470.00Channellock 10-Piece Combination Wrench Set
SRD 1,908.50SRD 3,470.00
Product categorie
