-
1 × SRD 340.91 -
1 × SRD 357.50 -
1 × SRD 1,563.64 -
1 × SRD 5,909.09 -
1 × SRD 505.00 -
2 × SRD 36.36 -
1 × SRD 1,995.45 -
1 × SRD 7,750.00 -
1 × SRD 3,725.00 -
-
-
1 × SRD 4,713.64 -
3 × SRD 8,550.00 -
-
-
-
1 × SRD 515.00
-
1 × SRD 1,138.50 -
1 × SRD 5,622.73 -
1 × SRD 1,845.45 -
1 × SRD 1,281.82 -
1 × SRD 2,622.73 -
1 × SRD 57.50 -
1 × SRD 580.00 -
1 × SRD 2,000.00 -
2 × SRD 47.50 -
1 × SRD 5,909.09 -
1 × SRD 14,090.90 -
3 × SRD 1,995.45 -
1 × SRD 45.00 -
1 × SRD 35.00 -
-
1 × SRD 113.36 -
-
-
1 × SRD 1,995.45 -
1 × SRD 895.45 -
1 × SRD 688.18 -
1 × SRD 7,000.00 -
1 × SRD 4,245.45 -
1 × SRD 374.00 -
1 × SRD 153,636.36 -
1 × SRD 1,625.00 -
2 × SRD 840.91 -
1 × SRD 1,695.00 -
-
1 × SRD 3,277.27 -
1 × SRD 60.00 -
1 × SRD 4,172.72 -
2 × SRD 7,268.18 -
-
1 × SRD 1,147.50 -
1 × SRD 1,045.45 -
-
1 × SRD 190.91 -
-
1 × SRD 2,100.00 -
1 × SRD 1,784.75 -
1 × SRD 5,409.09 -
1 × SRD 22,000.00 -
1 × SRD 681.81 -
1 × SRD 2,409.09 -
1 × SRD 1,640.00 -
1 × SRD 831.82 -
1 × SRD 1,170.00 -
1 × SRD 3,136.36 -
1 × SRD 35.00 -
2 × SRD 1,995.45 -
-
1 × SRD 1,995.45 -
-
1 × SRD 1,115.00 -
1 × SRD 890.00 -
1 × SRD 2,045.45 -
1 × SRD 2,690.00
-
SRD 18,059.80
SRD 45,149.50MAKITA TW1000 1″ IMPACT WRENCH W/FRICTION RING ANVIL
SRD 18,059.80SRD 45,149.50 -
MAKITA HM1101C DEMOLITION HAMMER;SDS-MAX
- Soft start feature.
- Constant speed under load
- One-touch sliding chuck for easy bit changes.
- Double Insulation
- Includes carry case
SRD 25,920.00SRD 64,800.00MAKITA HM1101C DEMOLITION HAMMER;SDS-MAX
SRD 25,920.00SRD 64,800.00 -
MAKITA HM1213C DEMOLITION HAMMER;SDS-MAX
- Comfort : Anti-Vibration Technology is an internal counterbalance system that greatly reduces vibration
- Durability : L.E.D. service light notifies the user approximately 8 hours before the brushes need to be replaced
- Applications : Variable speed control dial enables user to match the speed to the application
- Accuracy : Soft start suppresses start-up reaction for more precision and better accuracy
- Includes : Bull point, bit grease and case
SRD 30,040.00SRD 75,100.00MAKITA HM1213C DEMOLITION HAMMER;SDS-MAX
SRD 30,040.00SRD 75,100.00 -
MAKITA EK7301 14″73CC POWER CUTTER
- Five-stage, foam-paper-nylon system with advance
directional air flow provides cleaner air for better saw
performance - Improved ignition system with larger flywheel and rare
earth magnets create more efficient power - Cutting arm position changes simply from center position
to flush (outboard) position allowing cuts directly
adjacent to curb edges, wall or directly above the ground - On-Off-Choke operation switch on a single lever for
operator convenience - Cushioned operator grips with 4 vibration-absorption
rubber buffers for increased operator comfort - Microchip-controlled carburetor designed to compensate
engine timing according to work load - Aluminum guard and wheel pressure plates to reduce weight
- Starter grip decompression valve for faster starting
SRD 33,560.00SRD 83,900.00MAKITA EK7301 14″73CC POWER CUTTER
SRD 33,560.00SRD 83,900.00 - Five-stage, foam-paper-nylon system with advance
-
MAKITA HM1810 BREAKER HAMMER
- Power : 15 AMP motor to tackle demanding jobs
- Comfort : Makita’s exclusive AVT® counterbalance system reduces vibration
- Durability : Automatic brush cut-out system for longer tool life
- Convenience : 16.4 ft. long power cord for easy maneuverability
- Includes : Hex wrench
SRD 35,550.68SRD 88,876.70MAKITA HM1810 BREAKER HAMMER
SRD 35,550.68SRD 88,876.70 -
MAKITA EK7651H 14″ POWER CUTTER 4ST ENGINE INSTALLED
- Automatic engine decompression valve is engineered
into the cam gear to reduce pull start force by 40% - Five-stage, foam-paper-nylon filtration system with
advance direction air flow to provide cleaner air for better
engine durability - Integrated wheels reduce fatigue during long straight cuts
and retract when not in use to prevent unexpected
movement - Clear primer bulb facilitates fuel delivery to the carburetor
for easier cold starts - Pressure compensated carburetor with vented choke
plate is engineered to reduce flooding by automatically
adjusting to deliver the proper amount of fuel - Advanced oil separation & lubrication system to improve
valve train durability and engine life - Specially treated rods, followers and valves minimize wear
and extend engine life - Single lever On-Off-Choke operation switch for operator
convenience - Shielded exhaust outlet and larger spark arrestor screen
prevents contaminates from restricting air flow - External fuel tank vent eliminates pressure build up
- Sealed cartridge recoil starter rope reduces wear by
keeping out dust and debris - Cutting arm easily changes from center position to flush
(outboard) position allowing cuts directly adjacent to curb
edges, wall or directly above the ground - Cushioned operator grips with 4 vibration-absorption
rubber buffers for increased operator comfort
SRD 38,200.00SRD 95,500.00MAKITA EK7651H 14″ POWER CUTTER 4ST ENGINE INSTALLED
SRD 38,200.00SRD 95,500.00 - Automatic engine decompression valve is engineered
