-
MAKITA M0600G MT 10 MM DRILL
- High performance and durability at a low cost.
- Variable speed trigger allows operator to adjust speed based on material or application.
- Powerful 350 W motor for continuous use.
- Positive-grip in-line design maximizes thrust.
- Compact and lightweight for reduced operator fatigue.
SRD 960.00SRD 2,400.00MAKITA M0600G MT 10 MM DRILL
SRD 960.00SRD 2,400.00 -
STERILITE 15848006 CADDY WHITE
This Ultra Caddy from Sterilite is the ideal organizer for storing your tools. However it is Also suitable for storing and organizing brushes supplies for horses. This Ultra Caddy from Sterilite is the ideal organizer for storing your tools.
SRD 60.00STERILITE 15848006 CADDY WHITE
SRD 60.00 -
MAKITA KP0800-240 POWER PLANER
- Right Chip Ejection
- Parallel Fence
- Lock-Off Switch
- Dust Extraction Facility
- Fan-Cooled Motor
- Replaceable Carbon Brushes
- Soft-Grip Handle
SRD 4,840.00SRD 12,100.00MAKITA KP0800-240 POWER PLANER
SRD 4,840.00SRD 12,100.00 -
MAKITA EK7651H 14″ POWER CUTTER 4ST ENGINE INSTALLED
- Automatic engine decompression valve is engineered
into the cam gear to reduce pull start force by 40% - Five-stage, foam-paper-nylon filtration system with
advance direction air flow to provide cleaner air for better
engine durability - Integrated wheels reduce fatigue during long straight cuts
and retract when not in use to prevent unexpected
movement - Clear primer bulb facilitates fuel delivery to the carburetor
for easier cold starts - Pressure compensated carburetor with vented choke
plate is engineered to reduce flooding by automatically
adjusting to deliver the proper amount of fuel - Advanced oil separation & lubrication system to improve
valve train durability and engine life - Specially treated rods, followers and valves minimize wear
and extend engine life - Single lever On-Off-Choke operation switch for operator
convenience - Shielded exhaust outlet and larger spark arrestor screen
prevents contaminates from restricting air flow - External fuel tank vent eliminates pressure build up
- Sealed cartridge recoil starter rope reduces wear by
keeping out dust and debris - Cutting arm easily changes from center position to flush
(outboard) position allowing cuts directly adjacent to curb
edges, wall or directly above the ground - Cushioned operator grips with 4 vibration-absorption
rubber buffers for increased operator comfort
SRD 38,200.00SRD 95,500.00MAKITA EK7651H 14″ POWER CUTTER 4ST ENGINE INSTALLED
SRD 38,200.00SRD 95,500.00 - Automatic engine decompression valve is engineered
-
MAKITA EK7301 14″73CC POWER CUTTER
- Five-stage, foam-paper-nylon system with advance
directional air flow provides cleaner air for better saw
performance - Improved ignition system with larger flywheel and rare
earth magnets create more efficient power - Cutting arm position changes simply from center position
to flush (outboard) position allowing cuts directly
adjacent to curb edges, wall or directly above the ground - On-Off-Choke operation switch on a single lever for
operator convenience - Cushioned operator grips with 4 vibration-absorption
rubber buffers for increased operator comfort - Microchip-controlled carburetor designed to compensate
engine timing according to work load - Aluminum guard and wheel pressure plates to reduce weight
- Starter grip decompression valve for faster starting
SRD 33,560.00SRD 83,900.00MAKITA EK7301 14″73CC POWER CUTTER
SRD 33,560.00SRD 83,900.00 - Five-stage, foam-paper-nylon system with advance
-
SRD 18,059.80
SRD 45,149.50MAKITA TW1000 1″ IMPACT WRENCH W/FRICTION RING ANVIL
SRD 18,059.80SRD 45,149.50 -
B-14560 MAKITA 115MM ALUMINIUM GRINDING DISC WHEEL
- 115mm Disc Size
- 22mm Bore Dimensions
- Maintains High Grinding Speed Throughout Life
- 4 x Increased Efficiency
- Lower Friction, Less Heat Build-Up
SRD 25.00SRD 50.00B-14560 MAKITA 115MM ALUMINIUM GRINDING DISC WHEEL
SRD 25.00SRD 50.00 -
MAKITA 793328-0 ROUTER BIT
U-GROOVE CUTTER MAKITA DESIGNED FOR ROUTERS
SRD 35.00SRD 70.00MAKITA 793328-0 ROUTER BIT
SRD 35.00SRD 70.00 -
MAKITA A-85329 CUTTING DISC 7″ 2.5MM PREMIUM
Makita Cut Off Wheel 180X2.5X22 A30R. Makita offer the highest quality accessories to compliment their extensive power tool and garden tool range.
SRD 52.50SRD 105.00MAKITA A-85329 CUTTING DISC 7″ 2.5MM PREMIUM
SRD 52.50SRD 105.00 -
MAKITA 793065-6 U-GROOVING BIT 12
The Makita cutter is designed for milling and selecting grooves and grooves in solid wood. With the help of a carbide groove cutter, you can produce body parts, bottoms of shelves and perform edging work. Excellent for working with wood, sheet and derived materials.
SRD 230.00MAKITA 793065-6 U-GROOVING BIT 12
SRD 230.00 -
MAKITA 711113-A D MASONRY BIT 5/8X13″
Masonry drill bits and concrete drill bits are solid drills that are suitable for drilling in various types of stone, such as brick, concrete and sand-lime brick
SRD 267.50SRD 535.00MAKITA 711113-A D MASONRY BIT 5/8X13″
SRD 267.50SRD 535.00 -
MAKITA 199993-7 PSK BL 1830B,DC185SD+CARTON
DC185SD:
- The charger communicates with the individual cell in battery with a built in CPU and then it controls current, voltage, and temperature for both rapid and optimum charge
- Therefore the battery has longer life as it can be charged in the best method and duration
SRD 4,997.50SRD 9,995.00MAKITA 199993-7 PSK BL 1830B,DC185SD+CARTON
SRD 4,997.50SRD 9,995.00
Product categorie
