-
BLACK + DECKER MS600B MOUSE SANDER POLISHER WITH ZONE TOUCH
· A three-position Zone Light Indicator communicates when the sander is operating most efficiently for the best sanding results The Auto Calibration feature calibrates the three position indicator based on the incoming voltage from the power outlet every time you turn on the mouse
A separate finger attachment detail sands deep into corners and other hard-to-reach areas
Versatile sander that takes you from general sanding to sanding tight corners and curved shapes that other sanders can’t reach
Includes 12 sanding accessories and a storage bag
SRD 1,330.00 -
BLACK+DECKER 5.5A ANGLE GRINDER 4-1/2-INCH
- Metal gearbox for durability and longer life
- 3-position side handle provides extra comfort and control
- Spindle lock for easy accessory changes
- Included components: 4-1/2″ small angle grinder, metal grinding wheel, open-end wrench, wheel guard
SRD 2,000.00BLACK+DECKER 5.5A ANGLE GRINDER 4-1/2-INCH
SRD 2,000.00 -
BLACK+DECKER BDEJS300C JIG SAW, 4.5 -AMP
- 4.5A motor and variable speed up to 3000 SPM
- New and improved Wire Guard Sightline channel that improves the view of the cut lines
- Base plate tilts to allow for angled cuts
- Dust blower helps keep saw dust out of your work area
- Included components: (1) BDEJ300C; Stroke length: 0.75 inches; firing per minute: 3000 bpm
SRD 940.00BLACK+DECKER BDEJS300C JIG SAW, 4.5 -AMP
SRD 940.00 -
BLACK+DECKER ELECTRIC SANDER, 1”/4″ SHEET, ORBITAL (BDEQS300)
BLACK+DECKER Electric Sander, 1/4-Inch Sheet, Orbital (BDEQS300)
-
Biedt een 270 ° vlakke schuurspeling
-
Tri-layer filtratie
-
Paddle-schakelaar met zachte grip Activering van schakelpeddels voor eenvoudig aan- en uitzetten tijdens het aanbrengen
-
Inbegrepen componenten: (1) BDEQS300 schuurmachine, (1) vellen schuurpapier, (1) papierpons, (1) stofzak
SRD 1,010.00 -
-
CAMPBELL CORDLESS INFLATOR
CAMPBELL CORDLESS INFLATOR
- Inflator beschikt over handige, ingebouwde voeding kan veel 12 volt werken of opladen
SRD 1,575.00CAMPBELL CORDLESS INFLATOR
SRD 1,575.00 -
CHAMBERLAIN CWA2000 WIRELESS MOTION ALERT
Chamberlain CWA2000 Wireless Motion Alert
De Chamberlain Motion Sensor met Wireless Motion Alert is een handig en betaalbaar veiligheids- / beveiligingssysteem. Het beschikt over een weerbestendige buitensensor met instelbare gevoeligheidsregeling. De sensor kan tot een halve mijl van de basiseenheid worden geplaatst. Waarschuwt met licht en geluid wanneer voertuigen of voetgangers naderen binnen een straal van 9 meter. Uitbreidbaar tot 4 sensoren, het is perfect voor thuis, bedrijf, onroerend goed en werkplek.
SRD 460.00CHAMBERLAIN CWA2000 WIRELESS MOTION ALERT
SRD 460.00 -
CHAMBERLAIN GROUP 8808CB-P CHAMBERLAIN 8808CB 8-FOOT, COMPATIBLE WHISPER DRIVE PLUS MODELS, INCLUDES REPLACEMENT BELT GARAGE DOOR OPENER 8 FT RAIL EXTENSION KIT
- The product is 8′, New Structural Steel Rail Extension Kit
- Easy and simple to use kit
- The product is made in China
- For use with Chamberlain Whisper Drive and Whisper Drive Plus belt drive garage door openers with the quick install track system
- Works on garage doors up to 8 feet high
- Includes rail extension, replacement strap and all necessary hardware
- New Structural Steel Rail System
- Increases Structural Integrity
SRD 325.00 -
STALEY 810130 HARDWARE SP35-2C DOUBLE ROLLER CABINET CATCH
- For use on cabinet doors
- Arms work independently for positive action
- Keep the door away from the cabinet to reduce noise
- Rollers absorb shock
- Self-marking stroke for easy installation
SRD 9.75 -
-
STANLEY 16-870 DYNAGRIP CHISEL 6mm 1/4″
The Stanley DYNAGRIP Wood Chisel features a steel impact cap that can be used with a steel hammer. With a longer soft grip handle for improved grip and control, forged carbon steel blades for assurance of strength and durability. The pre-sharpened blade is immediately ready for use.
SRD 59.60STANLEY 16-870 DYNAGRIP CHISEL 6mm 1/4″
SRD 59.60 -
STANLEY DC INVERTER STICK WELDER POWER 110V – 80A
The Stanley Power 119 is a powerful, compact, and portable welder. Weighing only 3.6 kg, it operates on 120 volts and delivers up to 80 amps. It is suitable for 7018, 6011, and 6013 electrodes and comes with a professional Stanley carrying case. The DC inverter technology ensures longer duty cycles and smooth welds. It can weld mild steel and stainless steel up to 4 mm thick, with precise power control, and can be used with a generator. Turbo cooling and an automatic shut-off feature prevent overheating. This item is Ideal for home use, maintenance, repairs, workshops, and fieldwork, it also includes cables, an electrode holder, a clamp, a hammer/chisel, and a face shield
SRD 5,750.00STANLEY DC INVERTER STICK WELDER POWER 110V – 80A
SRD 5,750.00
Product categorie